Chevrolet 2006 Monte Carlo Spezifikationen PDF herunterladen (Seite 360)

When the malfunction indicator is illuminated, the

system may not be able to detect or signal low

tire pressure as intended. TPMS malfunctions may

occur for a variety of reasons, including the

installation of replacement or alternate tires or

wheels on the vehicle that prevent the TPMS from

functioning properly. Always check the TPMS

malfunction telltale after replacing one or more

tires or wheels on your vehicle to ensure that the

replacement or alternate tires and wheels allow

the TPMS to continue to function properly.

A Tire and Loading Information label, attached to

your vehicle, shows the size of your vehicle’s

original equipment tires and the correct inﬂation

pressure for your vehicle’s tires when they

are cold. See Loading Your Vehicle on page 277,

for an example of the Tire and Loading

Information label and its location on your vehicle.

Also see Inﬂation - Tire Pressure on page 357.

Your vehicle’s TPMS system can warn you about a

low tire pressure condition but it does not replace

normal tire maintenance. See Tire Inspection and

Rotation on page 362 and Tires on page 349.

Notice: Do not use a tire sealant if your vehicle

has Tire Pressure Monitors. The liquid sealant

can damage the tire pressure monitor sensors.

The TPMS will not function properly if one or more

of the TPMS sensors are missing or inoperable.

If the system detects a missing or inoperable

sensor, an error message SERVICE TIRE

MONITOR SYSTEM will be shown on the DIC

display. If you have replaced a tire/wheel assembly

without transferring the TPMS sensors, the error

message will be displayed. Once you re-install the

TPMS sensors, the error message should go

off. See your GM dealer for service if all TPMS

sensors are installed and the error message

comes on and stays on.

TPMS Sensor Identiﬁcation Codes

Each TPMS sensor has a unique identiﬁcation

code. Any time you replace one or more of

the TPMS sensors or rotate the vehicle’s tires,

the identiﬁcation codes will need to be matched

to the new tire/wheel position. The sensors

are matched, to the tire/wheel positions, in the

following order: driver’s side front tire, passenger’s

side front tire, passenger’s side rear tire, and

driver’s side rear tire using a TPMS diagnostic

tool. See your GM dealer for service.

360

1 2 ... 355 356 357 358 359 360 361 362 363 364 365 ... 455 456

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet 2006 Monte Carlo Spezifikationen Seite 360

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Auto Alarmanlage Chevrolet 2006 Monte Carlo