Chevrolet 2006 impala Spezifikationen PDF herunterladen (Seite 128)

Turn Signal On Chime

If you leave either one of your turn signals on and drive

more than 3/4 mile (1.2 km), a chime will sound to

alert you.

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high

beam, push the turn signal/multifunction lever away

from you.

When the high beams

are on, a light on the

instrument panel cluster

also will be on if the

ignition is in the on

position.

To change the headlamps from high beam to low beam,

pull the turn signal lever toward you.

Flash-to-Pass

With the turn signal lever in the low-beam position, pull

the lever toward you momentarily to switch to

high-beams (to signal that you are going to pass).

If you have the headlamps on, they will return to

low-beams when you release the lever.

This feature operates even when the headlamps are off.

Windshield Wipers

Be sure to clear ice and snow from the wiper blades

before using them. If they are frozen to the windshield,

gently loosen or thaw them. Damaged wiper blades

may not clear the windshield well, making it harder to

see and drive safely. If the blades do become damaged,

install new blades or blade inserts. For more information,

see Windshield Wiper Blade Replacement on page 5-52

Heavy snow or ice can overload the wiper motor. A

circuit breaker will stop the motor until it cools down.

Clear away snow or ice to prevent an overload.

You control the windshield wipers by turning the band

with the wiper symbol on it.

8(Mist): For a single wiping cycle, turn the band to

mist. Hold it there until the wipers start. Then let go. The

wipers will stop after one wipe. If you want more

wipes, hold the band on mist longer.

3-8

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 389 390

Keine Kommentare

Chevrolet 2006 impala Spezifikationen Seite 128