Chevrolet 1967CHEVY II Installationshandbuch PDF herunterladen (Seite 19)

8.4 HEADLIGHT SECTION CONNECTIONS

8.4.1 Route the headlight, park light, horn and electric fan wires down the inner fender

panel to the horn area. Secure the wires to the inner fender panel using the

supplied clamps.

8.4.2 Connect the horn wires.

8.4.3 Take and route the headlight, park/turn and electric fan wires thru the core

support and connect to the driver side lights and fan relay (if a electric fan is

being used).

8.4.4 Take the headlight ground ring terminal and ground it using one of the bolts in

the core support.

8.4.5 Route the passenger headlight and park/turn wires across the front of the core

support as shown. Use the two small clamps supplied to secure the wires.

8.4.6 On the Passenger-side of the core support you will find a hole (see arrow -

Figure 8.19) in which you will route the park/turn signal wires through. Once you

have routed the wires back through the core support, then route them down the

side of the radiator to the park/turn signal light and connect. Route the headlight

wires and connect.

Figure 8.18 Headlight and Park/Turn Signal Wire Routing

Figure 8.17 Typical Fan Relay Installation (Painless Part #30101 Fan Relay Kit)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 29 30

Keine Kommentare

Chevrolet 1967CHEVY II Installationshandbuch Seite 19