128
Engine Oil Filter
Loosen the oil filter by tuning it counterclockwise with a filter wrench.
With a rag, wipe the fitting face of the oil pump clean so that the new oil filter can be
seated properly.
Lightly oil the O-ring and turn the oil filter until the sealing face is fitted against the
O-ring. Turn one full turn further with the filter wrench.
Check level of oil in the engine and replenish to specified level as necessary.
Start the engine and check for leaks in the oil filter. It is strongly advisable to use
the GMI genuine oil filter assembly for replacement.
The manufacturer strongly recommends against the addition of any additives
(Other than leak detection dyes) to the engine oil.
CAUTION
Kommentare zu diesen Handbüchern