Chevrolet 1994 S10 Pickup Bedienungshandbuch Seite 206

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 348
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 205
2.
3.
Get the vehicles close enough so
the
jumper cables
can
reach, but be
sure the vehicles
aren’t
touching each other.
If
they are,
it
could cause
ground connection you don’t want. You wouldn’t be able to start you1
vehicle, and the bad grounding could damage the electrical systems.
You could be injured if the vehicles roll. Set
the
parking brake
firmly
on
each vehicle.
Put
an automatic transmission
in
“P’
(Park) or a
a
manual transmission
in
“N”
(Neutral). If
you
have a four-wheel-drive
vehicle with
a
manual transfer case shift lever, be sure the transfer case
is not
in
“N” (Neutral).
Turn
off
the ignition
on
both vehicles.
Turn
off all lights that aren’t
needed, and radios. This will avoid sparks and help save both batteries.
And it could save your radio!
~~~
NOTICE:
~~
If
you leave your radio
on,
it
could
be badly damaged. The
repairs wouldn’t be covered by your warranty.
4.
Open the hoods and locate the batteries. Find the positive
(+)
and
negative
(-)
terminals on each battery.
5.
Check that
the
jumper cables don’t have loose or missing insulation.
If
they
do,
you could get
a
shock. The vehicles could be damaged,
too.
Before you connect the cables, here are some basic things you should
know. Positive
(+)
will
go to positive
(+)
and negative
(-)
will
go
to
5-4
Seitenansicht 205
1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare