Chevrolet 1994 S10 Pickup Bedienungshandbuch Seite 86

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 348
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 85
An indicator light near
the lever shows you
the transfer case
settings:
2
WHEEL
4HIGH
0
N
SET PARKING BRAKE
0
4LOW
The front axle portion
of
the diagram
on
the indicator will light up when
you shift into four-wheel drive.
A
slight delay between shifting and the
pattern's lighting
is
normal. If the pattern does not light up, or
if
the front
axle does not go out after you shift out of four-wheel drive, have your
dealer check your system. Turn the
LIGHTS
switch located above your
headlight switch
to
the left to dim your transfer case indicator light when
your headlights or parking lights are on.
2
WHEEL:
This setting
is
for driving in most street and highway situations.
Your front axle
is
not engaged in two-wheel drive.
4
HIGH:
This setting engages your front axle to help drive your vehicle.
Use
4
HIGH
when you need extra traction, such as on snowy or icy roads,
or
in
most off-road situations.
N
SET
PARKING
BRAKE:
Shift to this neutral setting only when your
vehicle needs to be towed.
4
LOW
This setting also engages your front axle to give you extra traction.
You may never need
4 LOW.
It sends the maximum power to all four
wheels. You might choose
4 LOW
if you were driving off-road in sand,
mud, or deep snow and climbing or descending steep hills.
You
can shift from
2
WHEEL
to
4
HIGH
or from
4
HIGH
to
2
WHEEL
while the vehicle
is
moving. It
is
not necessary for
you
to press the transfer
case shift lever button. Your front axle will engage faster if you take your
foot
off
of
the accelerator for a few seconds after you shift.
2-32
Seitenansicht 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 347 348

Kommentare zu diesen Handbüchern

Keine Kommentare