6.
Remove the
composite assembly.
7.
Turn the halogen bulb counterclockwise to remove
8.
Install the new bulb into the composite assembly by
turning
it
clockwise until it is completely tightened.
tightening all
of
the screws previously removed.
from
the assembly.
9.
Replace the composite assembly by installing and
Front Turn Signal Lamps
1. Remove the two screws at the inside edge
of
the
parking/turn signal lamp assembly.
2.
Remove the
lamp assembly.
3.
Squeeze the tab on the
side
of
the lamp socket
while turning the socket
counterclockwise.
4.
Pull the socket out
of
the lamp assembly.
5.
Pull the bulb from the socket.
6.
Gently push the new bulb into the socket.
7.
Put the socket back into the lamp assembly and
turn
it
clockwise until it locks.
8.
Put the parkinghrn signal lamp assembly back into
the vehicle and tighten the screws.
6-40
Kommentare zu diesen Handbüchern