Chevrolet 1999 S10 Pickup Bedienungshandbuch PDF herunterladen (Seite 266)

6-24

How to Add Fluid

Here’s how to add fluid. Refer to the Maintenance

Schedule to determine what kind of fluid to use. See

“Recommended Fluids and Lubricants” in the Index.

1. Remove the filler plug.

2. Add fluid at the filler plug hole. Add only enough

fluid to bring the fluid level up to the bottom of the

filler plug hole.

3. Install the filler plug. Be sure the plug is fully seated.

Hydraulic Clutch

The hydraulic clutch linkage in your vehicle is

self

-adjusting. The clutch master cylinder reservoir is

filled with hydraulic clutch fluid.

It is not necessary to regularly check clutch fluid unless

you suspect there is a leak in the system. Adding fluid

won’t correct a leak.

A fluid loss in this system could indicate a problem.

Have the system inspected and repaired.

When to Check and What to Use

Refer to the Maintenance Schedule to determine how

often you should check the fluid level in your clutch

master cylinder reservoir and for the proper fluid. See

“Owner Checks and Services” and “Recommended

Fluids and Lubricants” in the Index.

How to Check and Add Fluid

The proper fluid should be added if the level does not

reach the bottom of the diaphragm when it’s in place in

the reservoir. See the instructions in the reservoir cap.

Rear Axle

When to Check and Change Lubricant

Refer to the Maintenance Schedule to determine how

often to check the lubricant and when to change it.

See “Scheduled Maintenance Services” in the Index.

1 2 ... 261 262 263 264 265 266 267 268 269 270 271 ... 380 381

Keine Kommentare

Chevrolet 1999 S10 Pickup Bedienungshandbuch Seite 266