Chevrolet 2006 Epica Spezifikationen PDF herunterladen (Seite 96)

To set the parking brake, hold the brake pedal down

and pull up on the parking brake lever. If the ignition

is on, the brake system warning light will come on.

See Brake System Warning Light on page 3-36.

To release the parking brake, hold the brake pedal

down. Pull the parking brake lever up until you can

press the release button. Hold the release button in

as you move the brake lever all the way down.

Notice: Driving with the parking brake on can

overheat the brake system and cause premature

wear or damage to brake system parts. Verify

that the parking brake is fully released and the

brake warning light is off before driving.

Shifting Into Park (P)

{CAUTION:

It can be dangerous to get out of your vehicle

if the shift lever is not fully in PARK (P) with

the parking brake ﬁrmly set. Your vehicle can

roll. If you have left the engine running, the

vehicle can move suddenly. You or others

could be injured. To be sure your vehicle will

not move, even when you are on fairly level

ground, use the steps that follow.

1. Hold the brake pedal down and set the parking

brake.

2. Move the shift lever into PARK (P) by pushing the

lever up and toward the driver’s side of the vehicle.

3. Turn the ignition key to LOCK.

4. Remove the key and take it with you. If you can

leave your vehicle with the ignition key in your

hand, your vehicle is in PARK (P).

2-26

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 367 368

Keine Kommentare

Chevrolet 2006 Epica Spezifikationen Seite 96