Chevrolet 2010 Camaro Bedienungsanleitung PDF herunterladen (Seite 127)

3. Press and hold for ﬁve seconds

the newly-trained Universal

Home Remote button (selected

button from Step 2) while

observing the indicator light

and garage door activation.

• If the indicator light stays on

continuously or the garage

door starts to move when

the Universal Home

Remote button is pressed

and released, then the

programming is complete.

There is no need to continue

programming Steps 4

through 6.

• If the Universal Home Remote

indicator light blinks rapidly

for two seconds, then turns to

a constant light and the garage

door does not move, continue

with the programming Steps 4

through 6.

It may be helpful to have

another person to assist

with the remaining Steps 4

through 6.

4. After Steps 1 through 3 have

been completed, locate inside

the garage the garage door

opener receiver (motor-head

unit). Locate the “Learn” or

“Smart” button. The name and

color of the button may vary

by manufacturer.

5. Firmly press and release the

“Learn” or “Smart” button.

After you press this button,

you will have 30 seconds

to complete Step 6.

6. Immediately return to the vehicle.

Firmly press and hold for

two seconds the Universal Home

Remote button, selected in

Step 2 to control the garage door,

and then release it. If the garage

door does not move or the garage

door lamp does not ﬂash, press

and hold the same button a

second time for two seconds, and

then release it. Again, if the door

does not move or the garage door

lamp does not ﬂash, press and

hold the same button a third time

for two seconds, and then

release.

The Universal Home Remote should

now activate the garage door.

To program the remaining

two Universal Home Remote

buttons, begin with Step 1 of

“Programming the Universal

Home Remote System”.

Instruments and Controls 4-47

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 371 372

Kommentare zu diesen Handbüchern

Keine Kommentare