Chevrolet 2010 Camaro Bedienungsanleitung PDF herunterladen (Seite 258)

How to Check Power Steering

Fluid

Check the level after the vehicle

has been driven for at least

twenty minutes so the ﬂuid

is warm.

To check the power steering ﬂuid:

1. Turn the ignition key to

LOCK/OFF and let the engine

compartment cool down.

2. Remove the engine cover. Refer

to Engine Cover on page 9-9.

3. Wipe the cap and the top of the

reservoir clean.

4. Turn the cap counterclockwise

and pull it straight up.

5. Wipe the dipstick with a

clean rag.

6. Replace the cap and completely

tighten it.

7. Remove the cap again and look

at the ﬂuid level on the dipstick.

When the engine is hot, the

level should be at the hot MAX

level. When the engine is

cold, the ﬂuid level should be

between MIN and MAX on

the dipstick.

What to Use

To determine what kind of ﬂuid to

use, see Recommended Fluids and

Lubricants on page 10-7. Always

use the proper ﬂuid.

Washer Fluid

What to Use

When windshield washer ﬂuid

is needed, be sure to read the

manufacturer’s instructions before

use. If operating vehicle in an area

where the temperature can fall

below freezing, use a ﬂuid that has

sufficient protection against freezing.

Adding Washer Fluid

Open the cap with the washer

symbol on it. Add washer ﬂuid until

the reservoir is full. See Engine

Compartment Overview on page 9-6

for reservoir location.

9-26 Vehicle Care

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 371 372

Kommentare zu diesen Handbüchern

Keine Kommentare