Chevrolet 2010 Camaro Bedienungsanleitung PDF herunterladen (Seite 189)

Tire and Loading Information

Label

A vehicle speciﬁc Tire and

Loading Information label is

attached to the vehicle’s center

pillar (B-pillar). With the driver’s

door open, you will ﬁnd the label

attached near the door lock post.

The Tire and Loading Information

label shows the number of

occupant seating positions (A),

and the maximum vehicle

capacity weight (B) in kilograms

and pounds.

The Tire and Loading

Information label also shows the

tire size of the original equipment

tires (C) and the recommended

cold tire inﬂation pressures (D).

For more information on tires and

inﬂation see Tires on page 9-48

and Tire Pressure on page 9-54.

There is also important loading

information on the Certiﬁcation

label. It tells you the Gross

Vehicle Weight Rating (GVWR)

and the Gross Axle Weight

Rating (GAWR) for the front

and rear axle. See “Certiﬁcation

Label” later in this section.

Steps for Determining Correct

Load Limit

1. Locate the statement

“The combined weight of

occupants and cargo should

never exceed XXX kg or

XXX lbs” on your vehicle

placard.

2. Determine the combined

weight of the driver and

passengers that will be

riding in your vehicle.

3. Subtract the combined weight

of the driver and passengers

from XXX kg or XXX lbs.

4. The resulting ﬁgure equals the

available amount of cargo and

luggage load capacity. For

example, if the “XXX” amount

equals 1400 lbs and there will

be ﬁve 150 lb passengers in

your vehicle, the amount of

available cargo and luggage

load capacity is 650 lbs

(1400 − 750 (5 x 150) = 650 lbs).

Label Example

Driving and Operating 8-13

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 371 372

Kommentare zu diesen Handbüchern

Keine Kommentare