Chevrolet Equinox 2006 Spezifikationen PDF herunterladen (Seite 372)

6. Connect the red positive (+) cable to the

positive (+) terminal of the dead battery.

Use a remote positive (+) terminal if

the vehicle has one.

7. Do not let the other end touch metal. Connect

it to the positive (+) terminal of the good

battery. Use a remote positive (+) terminal if

the vehicle has one.

8. Now connect the black negative (−) cable to

the negative (−) terminal of the good battery.

Use a remote negative (−) terminal if the

vehicle has one.

Do not let the other end touch anything until

the next step. The other end of the negative (−)

cable does not go to the dead battery. It

goes to a heavy, unpainted metal engine part

or to a remote negative (−) terminal on the

vehicle with the dead battery.

9. Connect the other end of the negative (−) cable

at least 18 inches (45 cm) away from the dead

battery, but not near engine parts that move.

The electrical connection is just as good there,

and the chance of sparks getting back to the

battery is much less.

Your vehicle has a remote negative (−)

terminal for this purpose.

10. Now start the vehicle with the good battery

and run the engine for a while.

11. Press the unlock button on the remote

keyless entry transmitter to disarm your

content theft-deterrent system.

12. Try to start the vehicle that had the dead

battery. If it will not start after a few tries, it

probably needs service.

Notice: If the jumper cables are connected or

removed in the wrong order, electrical shorting

may occur and damage the vehicle. The repairs

would not be covered by your warranty. Always

connect and remove the jumper cables in the

correct order, making sure that the cables do

not touch each other or other metal.

372

1 2 ... 367 368 369 370 371 372 373 374 375 376 377 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare