Chevrolet 1998 Corvette Bedienungshandbuch Seite 165

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 378
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 164
As
the interior of the vehicle warms up to your comfort
set temperature, the fan speed will decrease and the
temperature output may become cooler.
If
the interior
temperature continues to warm up due to heating from
the sun or outside temperature increases, the system
may switch to other air delivery modes (typically
DEFOG or BI-LEVEL).
A
ljpical Hot Weather Example:
Your
vehicle has been parked outside all day in hot
weather (above
7OoF/
21
O
C)
and you have set the driver
temperature at
73
OF
(23
"C)
and have selected the
AUTO
mode. The system will automatically adjust the
temperature output to maximum cooling. The blower
will start at a low speed momentarily to push the hot air
to the floor of the vehicle and then go to a higher blower
speed with cold airflow out of the instrument panel
outlets.
A
small amount of airflow will continue through
the lower ducts to cool the
floor
area.
The air intake may start in the recirculated mode for
maximum cooling performance.
As
the interior
of
the
vehicle cools down to your comfort set temperature, the
fan speed will decrease and the temperature output may
become warmer. The air intake may shift from
recirculation to fresh air mode.
If
the interior continues
to cool due to a decrease,,,in the amount of heat the
vehicle is absorbing from the sun or a decrease
in
the
outside temperature, the system could switch to other air
delivery modes (typically BI-LEVEL or DEFOG).
Manual Settings
With the Dual Zone Electronic Climate Control, there
are several manual settings you can use to control the
system and override the
AUTO
operation. You can
program the fan speed,
air
delivery mode, air intake
mode and control the air conditioning operation using
these settings. The system will still determine the
temperature output level based on the driver-set
temperature and the passenger temperature offset.
%
FAN
SPEED:
Press the button with the fan switch
on it to manually lock
in
the current fan speed and to
stop the automatic fan speed control. Pressing the
arrows will delete
AUTO
from the digital display. The
fan graphics with the fan speed bars will be shown.
To
increase the fan speed
so
that more
air
flows into the
vehicle, press the
UP
arrow on the fan switch. To
decrease the fan speed and airflow, press the DOWN
arrow. The
AUTO
button must be pressed to return to
the automatic fan control.
Seitenansicht 164
1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 377 378

Kommentare zu diesen Handbüchern

Keine Kommentare