Chevrolet 1999 Malibu Bedienungshandbuch PDF herunterladen (Seite 94)

yellowblue

2-32

Windshield Wipers

You control the windshield wipers by moving the stalk

with the wiper symbol on it up or down.

For a single wiper cycle, push the stalk down to MIST,

then release it. For more cycles, hold the stalk

down longer.

For steady wiping at low speed, move the stalk up to the

LO position. For high

-speed wiping, move the stalk up

further, to HI. To stop the wipers, move the stalk to OFF.

You can set the wiper speed for a long or short delay

between wipes. This can be very useful in light rain

or snow.

Move the stalk to INT, then turn the inner band, labeled

INT ADJ, and choose the delay you want. Turn the inner

band up for shorter delay times between wiper cycles.

Turn the band down for a longer delay time between

wiper cycles.

Remember that damaged wiper blades may prevent you

from seeing well enough to drive safely. To avoid

damage, be sure to clear ice and snow from the wiper

blades before using them. If they’re frozen to the

windshield, carefully loosen or thaw them. If your

blades do become damaged, get new blades or

blade inserts.

Heavy snow or ice can overload your wiper motor. A

circuit breaker will stop the motor until it cools. Clear

away snow or ice to prevent an overload.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 343 344

Keine Kommentare

Chevrolet 1999 Malibu Bedienungshandbuch Seite 94