Chevrolet Equinox 2006 Spezifikationen PDF herunterladen (Seite 120)

Make sure the shift lever is fully in PARK (P)

before starting the engine. Your vehicle has an

automatic transaxle shift lock control system. You

must fully apply your regular brakes ﬁrst and

then press the shift lever button before you can

shift from PARK (P) when the ignition key is

in RUN. If you cannot shift out of PARK (P), ease

pressure on the shift lever and push the shift

lever all the way into PARK (P) as you maintain

brake application. Then press the shift lever button

and move the shift lever into another gear. See

Shifting Out of Park (P) on page 125.

REVERSE (R): Use this gear to back up.

Notice: Shifting to REVERSE (R) while your

vehicle is moving forward could damage the

transaxle. The repairs would not be covered by

your warranty. Shift to REVERSE (R) only after

your vehicle is stopped.

To rock your vehicle back and forth to get out

of snow, ice, or sand without damaging your

transaxle, see If Your Vehicle is Stuck in Sand,

Mud, Ice, or Snow on page 314.

NEUTRAL (N): In this position, your engine does

not connect with the wheels. To restart when

you are already moving, use NEUTRAL (N) only.

Also, use NEUTRAL (N) when your vehicle is

being towed.

{CAUTION:

Shifting into a drive gear while your engine

is running at high speed is dangerous.

Unless your foot is ﬁrmly on the brake

pedal, your vehicle could move very

rapidly. You could lose control and hit

people or objects. Do not shift into a drive

gear while your engine is running at high

speed.

120

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 491 492

Kommentare zu diesen Handbüchern

Keine Kommentare