Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung PDF herunterladen (Seite 12)

Part #1572 & 1573

Brochure #63-1572

Rev. 1/11 - AJ/mc

Edelbrock GM LS7 Supercharger System for

2006 - 2010 Z06 Corvettes

Installation Instructions

Page 11

32. Disconnect the EVAP solenoid electrical connector.

33. Disconnect MAP sensor electrical connector.

34. Disconnect the vacuum hose from the brake booster

fitting; it will be removed with the manifold.

35. Disconnect and remove the two EVAP tubes located

at the front of the manifold.

36. Disconnect passenger side PCV tube from valley plate.

37. Remove the intake manifold and disconnect the small

vacuum hose at the rear of the manifold next to the larger

brake booster hose, if it is present. Leave this hose

hanging from the firewall as it will be reconnected later.

38. Use masking tape to cover the exposed intake ports

on the cylinder head.

39. Remove the o-ring port gaskets from the stock intake

manifold and set them aside for reuse later.

40. Use a 15mm socket to remove the two bolts retaining

the belt tensioner.

41. Disconnect the oil pressure sensor electrical

connector at the rear of the valley plate.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Keine Kommentare

Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung Seite 12