Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung PDF herunterladen (Seite 2)

Part #1572 & 1573

Brochure #63-1572

Rev. 1/11 - AJ/mc

Edelbrock GM LS7 Supercharger System for

2006 - 2010 Z06 Corvettes

Installation Instructions

Page 1

Edelbrock LLC, 2700 California Street, Torrance, CA 90503

Toll-Free Tech Line: 1-800-416-8628 Office/Sales Line: 310-781-2222

Thank you for purchasing the Edelbrock 7.0L GM Supercharger System for the Chevy Corvette Z06. The Edelbrock E-Force

Supercharger System for the 2006 to 2010 Corvette Z06 (not compatible with ZR1 or base models) utilizes Eaton’s new

Gen VI TVS Supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum

temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock Supercharger is a complete

system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. This

results in maximum airflow, with minimal temperature rise and power consumption. The supercharger housing itself is

integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum

leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least

restrictive inlet path on the market. The supercharger is inverted, expelling the air upward. Air pressure then builds in the

plenum, before being drawn down through each of two intercooler cores, oriented horizontally, next to, and below the

supercharger outlet. After passing through the intercooler cores, the air travels through the long 12” runners, which route

underneath the supercharger housing to the cylinder head ports, in a horizontal, nested configuration. The upper plenum

area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance.

This configuration allows for a compact package that can fit under the stock hood and cowl of the C6 Corvette, without

sacrificing runner length, or intercooler area. The E-Force supercharger features a uniquely styled plenum, and includes

matching side covers. The Edelbrock supercharger provides neck snapping performance that is safe to operate on a

completely stock engine. It is 50-state emissions legal, and can be had with an optional 5-year 100,000 mile warranty

so that there are no worries when installing it on a brand new car.

INTRODUCTION

TOOLS AND SUPPLIES REQUIRED

 Jack and Jack Stands

OR Service Lift

 Panel Puller

 Ratchet and Socket Set including: 7mm, 8mm, 10mm

(standard, deep and universal), 11mm, 12mm (deep),

13mm, 15mm, 18mm, 21mm (deep), 24mm

 Wrenches including: 8mm, 18mm, 27mm

 18mm Line Wrench

 12” Ratchet Extension Bar

 1/2” Breaker Bar

 Flat Blade & Philips Screwdrivers

 Compressed Air

 Torx-20 Driver

 Allen Wrenches including: 5mm, 6mm, 8mm

 2” Long 6mm Allen Socket

 3/8” Fuel Line Removal Tool

 Torque Wrench

 Needle Nose Pliers

 Pliers

OR Hose Clamp Removal Tool

 Pneumatic or Power Drill

 Impact Wrench

 Loctite 609 Retaining Compound or equivalent

 O-ring Lube

 Anti-sieze

 Masking Tape

 DT-47731 Transmission Cooler Quick Disconnect Tool

 J-42188 Ball Joint Separator

 J-42386-A Flywheel Holding Tool

1 2 3 4 5 6 7 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Autos Chevrolet CORVETTE Z06 - 2010