Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung PDF herunterladen (Seite 15)

Part #1572 & 1573

Brochure #63-1572

Rev. 1/11 - AJ/mc

Edelbrock GM LS7 Supercharger System for

2006 - 2010 Z06 Corvettes

Installation Instructions

Page 14

66. Use a 13mm socket to remove the four bolts retaining

the stabilizer brackets.

67. Use a 13mm socket to remove the two nuts retaining

the brake pressure modulator valve.

68. Place a catch pan below the steering gear then use

an 18mm line wrench to disconnect the two power

steering lines from the steering gear.

69. Use a 10mm socket to remove the bolts retaining the

power steering line brackets or fluid cooler, if equipped.

70. Use a floor jack to support the oil pan.

71. Use a 21mm deep socket to remove or loosen the

two front engine cradle bolts.

72. Disconnect the ride height sensor electrical connector

from each side, if equipped.

73. Use a 10mm socket to remove the driver side brake

line bracket bolt.

74. Use a 10mm socket to remove driver side ride height

sensor bolt, if it is present.

75. Use a 13mm socket to remove the lower brake

modulator bracket bolts.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 30 31

Keine Kommentare

Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung Seite 15