Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung PDF herunterladen (Seite 19)

Part #1572 & 1573

Brochure #63-1572

Rev. 1/11 - AJ/mc

Edelbrock GM LS7 Supercharger System for

2006 - 2010 Z06 Corvettes

Installation Instructions

Page 18

122. Apply blue loctite to the threads of a 20mm bolt

supplied in Bag #1, then use a 12mm socket and the

supplied washer to mount the pulley on the new lower

idler bracket so that the open side of the pulley faces

away from the bracket, then torque the bolt to 18 ft-lbs.

123. Use a 10mm socket to remove the three bolts on the

passenger side of the water pump.

124. Use a 2” long 6mm Allen socket and the three

90mm bolts supplied in Bag #1 to install the lower idler

bracket on the water pump, then torque them to 18 ft-lbs.

125. Use a 15mm socket and the two stock bolts to

mount the new tensioner bracket onto the water pump

then torque them to 37 ft-lbs.

126. Use an 8mm allen tool to install the 45mm bolt

supplied in Bag #1 that retains the tensioner bracket to

the cylinder head and torque it to 37 ft-lbs.

127. Apply blue loctite to the threads of a 20mm bolt

supplied in Bag #1, then use a 12mm socket and the

supplied washer to mount the pulley on the tensioner

bracket and torque it to 18 ft-lbs.

128. Use a 15mm socket and the 65mm bolt supplied in

Bag #1 to install supplied tensioner on new bracket and

torque it to 37 ft-lbs.

129. Use a 12mm socket and a 20mm bolt supplied in

Bag #1 to mount the EVAP purge solenoid on the back of

the new tensioner bracket.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Keine Kommentare

Chevrolet CORVETTE Z06 - 2010 Bedienungsanleitung Seite 19